PH232Y11
Serial RS232/TTL USART Repeater & Isolator
Introduction
IP Electronix PH232Y11 is a Bi-Directional Serial RS232/TTL UART Repeater and Isolator and Amplifier. It works with Baud-Rate from 300bps to 230400bps. This device adds up to 3kV optical and electrical insulation between the two RS232 sides, which eliminates noise from the RS232 path. Also, if a length of more than 15m is required for the RS232 line, by adding one PH232Y11, the length of the RS232 cable can be increased up to at least 30m, i.e., 15m meters on each side. Also, due to having the TTL ports, PH232Y11 can be connected directly to a microcontroller system.
Protection against Surge, ESD and EMI is considered in its design and also there is 3kV Electrical and Optical insulation between RS232/TTL UART sides.
PH232Y11 is designed for industrial usage and is useful for Industrial Automation, Telecommunications, SCADA Systems, DCS Systems and …
Contact us to buy and know the price of Serial Repeater and Isolator PH232Y11 converter.
Specifications
- Serial RS232 Repeater, Isolator and Amplifier;
- Number of Ports: #1 RS232/TTL UART to #1 RS232 Bi-Directional Repeater;
- Serial Standard: Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards;
- RS232 Signal (Full Flow Control Support): TxD, RxD, DTR, RTS, DSR, DCD, CTS, RI, GND;
- RS232 Parity: Even, Odd, None, Mark and Space;
- Fully Plug & Play;
- Wide Range Power Supply: +8V to +48V DC;
- Serial Transmission Speed up to 230.4 kbps;
- Power (Green) LED Indicator;
- Transmit (Blue) and Receive (Yellow) LED Indicator;
- Isolation Protection: 3kV Instantaneous, 500V DC Continuous;
- Surge Protection: Embedded 1500W Surge Protection;
- Magnetic Isolation:5 kV Built-in;
- ESD Protection: RS232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM);
- Dimensions: 26mm x 71.6mm x 122 mm (1.03in x 2.8in x 4.82in);
- Operating Temperature: -10°C to +70°C (+14°F to +158°F);
- 1 Year Guarantee and 5 Years Support.